Preparing Your Floors For Epoxy Floor Paint

For those who have decided to apply epoxy floor paint for use in your concrete floors, then there’s something that you’re likely to do prior to the actual painting. You must do this stuff so that you can get ready for the use of the paint. Should you follow these directions when you need to do really unveil the epoxy it’ll follow the floor and last for many years.

Most people do not spend time around the front finish from the project performing these tasks despite their importance, so these unlucky homeowners fail to offer the look that they’re wishing for. If you’re expecting to obtain a great searching floor, and to obtain the needed protection against moisture that may seep in to the created cracks, then here are a few things you need to do before beginning painting your flooring.

The very first factor that you’ll want to complete is to determine the floor that you’re going to paint for any sealer. You won’t wish to waste your hard earned money and energy painting the ground having a sealer on its surface since the paint will undoubtedly not stick. It is way better should you perform a simple test to understand if there’s sealant existing at first glance. You just need just a little quantity of water sprayed out on the ground. If water beads are created, a sealant is since the floor. You will have to remove all of the sealant before you apply the paint if you would like it to stay. The easiest method to do that is by using an position grinder or perhaps a shot blaster. Bear in mind: This makes concrete dust which may be dangerous so make sure to put on a nose and mouth mask.

Without having a sealer then the next thing is to degrease the ground. If there’s any oil or any other contaminants staining the ground they will have to be removed or even the chemical bond between your epoxy and also the upper top of the concrete floor won’t be sufficient.

Another factor that you may have to complete prior to the actual use of the epoxy floor paint that you’ll be using would be to observe that the ground is completely dry. When you wash the ground and degrease it you’re best to allow it looking for overnight having a space heater running in order that it need the epoxy like it’s supposed to.